News > News Archive > Fall Parts Sale

Fall Special Parts Sale

All items listed in this notice are on special until Oct 30, 2011, or while current supplies last. 

18 position adjustable front coilover damper.  Normally USD$499 (361 Euro) on sale for USD$325 (235 Euro).

4:2:1 Exhaust system for Fiat 850, 1000TC, 1000OT.  WIll also fit Fiat 600.  Constructed of stainless steel with 9mm thick flange.  Exhaust comes standard with stinger as shown.  Normal price USD$960 (695 Euro)  Sale price USD $629 (456 Euro).

TCR style 4:1 exhaust complete with stinger.  This unit is designed to fit the standard Fiat or PBS cylinder heads only. (for units with TCR flange please inquire).  All stainless steel construction.  Regular price USD$960 (695 Euro)  Sale Price USD$629 (456 Euro).

PBS Shorty Water Pump.  Will fit all types of Fiat blocks.  Complete with v-belt pulley.  Normal Price USD$299 (216 Euro).  Sale Price USD$200 (145 Euro).

Forged pistons set, complete with rings, pins and clips.  All sets are NOS, unless specifically indiated.  Normal Price USD$599 (434 Euro)  Sale Price $400 (290 Euro)

65.25mm small dome for OT1000

65.75mm small dome for 1000TC using 600/AH/843cc block

66.00mm small dome for 1000TC using 600/AH/843cc block

65mm 11:1 for 982cc Bialbero using 600/AH/843 block

65.75mm (used) flat top using 600/AH/843 block.

 

SPECIAL ANNOUNCEMENT - PBS "GEN4"  Cylinder Head with FlowCone technology.

For a number of months I have been working on revising the PBS head, with a view to increasing the flow and optimizing the combustion chamber for better flame propagation.

This is the result of the work.  This head flows an average of 14% more air than the previous version, up to 12.5mm valve lift.  The head itself incorporates the new "FlowCone" technology, and with a flat top piston it will produce 12.5:1 compression.  For road going applications you would have to order "dished" pistons to get the compression closer to 10:1.

This is a special "Pre-Order" offer.  I will be having new heads cast in the next 30 days.  These will then be machined and finished.  Production time is planned for 8-10 weeks, with deliveries beginning around December 25, 2011.   (A good Christmas present)          Order must be received and paid for by Oct 30, 2011 to be eligible for this special offer.

These heads will be completely CNC machined, and therefore will ONLY be available in completely finished versions ready for installation:

Part #  01-05-04  Complete head with 7mm stem valves, titanium retainers, 6 deg. collets, springs, spring seats, bronze guides, valve seats, 4 angle valve job and FlowCone chambers.  Also included is intake manifold and valve cover.  Work includes full port preparation and intake manifold port matching.  Normal Price $ 2950 USD (2235 Euro)   Special Pre-Order Price $2537 USD (1922 Euro)

Part #  01-05-05  Complete head with 5mm stem valves, titanium retainers, 6 deg. collets, lash wear pads, springs, spring seats, bronze guides, valve seats, 4 angle valve job and FlowCone chambers.  Also included is intake manifold and valve cover.  Work includes full port preparation and intake manifold port matching.  Note:  This reducess the reciprocating mass of the valve train by 34%.  Normal Price $2999 USD ( 2275 Euro).  Special Pre-Order Price $2580 USD (1955 Euro)

Note: These prices are actually less than a fully prepared Gen 3 head because the preparation is much more automated.

News Archive »

 

 
Specialist Services
Calendar and Race Reports


Gallery